Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
This is a STOCK,easy, fun class. This class is for any compact car, truck,van or suv.
Build
◦ Vehicles must be 100% stripped and cleaned out before coming to inspection
◦ No simplified/ altered harnesses
◦ You can move the battery inside and strap it to the floor or a secure place or it can be spray foamed in the factory location under the hood
◦ Gas tanks can remain under the vehicle as long as they are in front of the rear axle. If they are not then a fuel cell needs to be mounted in the back seat area in a secure location. No factory tanks inside the vehicles
◦ You can have a simple 2x2 bar behind the seat for safety
◦ All doors, hoods,trunks, and tailgates must be wired or chained closed with a minimum of 4 spots at each location
◦ Windshield can stay in place if desired. If it’s removed you need wire or chain from the roof to the cowl in at least one spot.
◦ All other windows must be removed
◦ Dot tires only, no forklift tires or solids
◦ No bumper swaps
◦ No welding period other that the bar behind the seat
◦ Brakes are required the whole time
◦ Headers are allowed.
◦ No trailer hitches
◦ You can notch the rear frames to help to make it roll up.
◦ There are not many rules for this class because there is literally not that much you can do to the vehicles.
◦ Drivers door can be plated on the inside only. Passenger side door can be plated half the height of the door only for leg protection of the rider
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.