Rules - Mini Vans and Trucks 2026

---

 1. Vehicles: Any Year Mini Van, Mini Truck or Mini SUV (Blazer, Explorer Etc.) 4x4 vehicles must remove one driveshaft.   DURANGOS ALLOWED, NO V8S

2. Bumpers: You can use any OEM Car or replica bumper except chrysler pointy on the front but back has to be stock. All bumpers must be in stock location.  Can also use a tubing bumper no bigger than 4x6. You can have a small point that measures 4” off the front of the tubing and spans a total of 24” wide, (12” from the center of the point each way).  Bumpers can be welded on or bolted.  If using a stock OEM bumper, it can be seam welded AND loaded.  If your vehicle didn’t come equip with bumper shocks, you CANNOT  add them.  you can hardnose the bumper straight to the frame with a 6x6x1/4” plate to mount to.  plate must be on the front of the frame for mounting purposes only, not on the side of the frame.       

3. Cage: Can have a bar no bigger than 4x4 from door post to door post behind the seat with a plate on each end no bigger than 6x6 that can be bolted or welded to secure the bar in place.    

4. Drivetrain: No Motor Swaps must be OEM to the vehicle (Ford to Ford, Chevy to Chevy etc.) Motor and transmission can’t have any type of protectors. No slider driveshafts. 4 & 6 Cylinder Only.  

5. Hoods,Trunks,Doors: All hoods, trunks and doors are allowed wired in 6 spots 2 strands each spot. Tailgates can be dropped down and wired only.   Doors can either be wired or welded with 2 4x4 plates per each vertical door seam. Not welded and wired.  

6. Tires & Wheels: Any tires and wheels allowed. No bead locks  

7. Gas Tanks & Batterys: Gas tanks must me mounted in bed or in back covered and secured. Can have a gas tank protector around tank only and can’t touch sheet metal other than bolting to the floor pan. Battery must be in passenger compartment covered and secured.   

8. Frame & Body: Can’t crease frame or body, must be stock with all stock components. No altering of frame or body unless noted in rules. Must remove all glass and no rolling down windows.   

9. Suspension: Must be stock with stock components, no adding leaves or spacers. Must have give to it.   

10. This is a stock class and any entry found to be outside the rules that written will asked to fix or load. No gray areas and we reserve the right to define the rules  

11.  Vehicles MUST be stripped before bringing them to the track.  No stripping cars in the pits.  All plastic bumper covers, headlights, etc must be removed.   

12. All cars are allowed 4-4x4x1/4” patch plates. Preran cars can have a total of 6.  Once they are welded on, they cannot be taken back off.